Holder for Ultipanel LCD controller – print failed!

23 Mar

Slicing Software: Cura 13.03
Layer height: 0.2mm
Wall thickness: 0.8mm
Bottom/Top thickness: 0.6mm
Fill Density: 100%
Print speed: 50mm/s
Printing temp: 230
Suppport: No
Raft: Yes
Filament Diameter: 2.87
Packing Density: 1.00
Retraction: Enabled
Duplicate outlines: Enabled
Infil overlap: 22%
Material: PLA 3mm
Print Status: FAIL

The STL file you will find here: http://www.thingiverse.com/thing:19440

ultimaker_fail8 ultimaker_fail7 ultimaker_fail6 ultimaker_fail5 ultimaker_fail4 ultimaker_fail3 ultimaker_fail2 ultimaker_fail1